What to do if the 'overload' LED flashes on my Victron Energy Inverter?
If the 'overload' LED is flashing on your Victron Energy Inverter, it means the load connected to the inverter is higher than its nominal capacity. To resolve this, disconnect a portion of the load.
Why is the 'low batt.' LED flashing on my Victron Energy Inverter?
If the 'low batt.' LED is flashing on your Victron Energy Inverter, it indicates that the battery voltage is low. You should recharge the batteries or check the battery connections to fix this issue.
What does it mean when the 'overload' LED is on solid on a Victron energy Phoenix 12/500 Inverter?
If the 'overload' LED is illuminated on your Victron Energy Inverter, it means the inverter has switched off because the load is too high. You should disconnect part of the load to resolve this.
What does it mean when the 'low batt.' LED is on solid on a Victron energy Phoenix 12/500 Inverter?
If the 'low batt.' LED is illuminated on your Victron Energy Inverter, it means that the inverter switched off because the battery voltage was too low. Recharge the batteries or check the battery connections.
Why is the 'temp.' LED flashing on my Victron Energy Inverter?
If the 'temp.' LED is flashing on your Victron Energy Inverter, it indicates that the ambient temperature is high, the temperature of internal components is high, or the load is too high. Place the inverter in a cool, well-ventilated area or disconnect part of the load to resolve this.
What does it mean when the 'temp.' LED is on solid on a Victron energy Phoenix 12/500 Inverter?
If the 'temp.' LED is illuminated on your Victron Energy Inverter, it means the inverter has switched off due to a high ambient or component temperature, or because the load is too high. To fix this, place the inverter in a cool, well-ventilated place or disconnect part of the load.
Why are 'low batt.' and 'overload' LEDs flashing together on my Victron energy Phoenix 12/500?
If both the 'low batt.' and 'overload' LEDs are flashing on your Victron Energy Inverter, it indicates a low battery voltage and a load that is too high, or that the ripple voltage at the input exceeds 10%. To solve this, try the following: * Recharge the batteries. * Disconnect part of the load. * Place a ripple suppressor or use batteries with a higher capacity. * Mount shorter or thicker battery cables.
What does it mean when the 'low batt.' and 'overload' LEDs are solid on my Victron Energy Inverter?
If the 'low batt.' and 'overload' LEDs are illuminated on your Victron Energy Inverter, the inverter switched off due to a ripple voltage at the input that was too high. You can place a ripple suppressor and/or batteries with a higher capacity. Also, mount shorter and/or thicker battery cables and reset the inverter (switch OFF and ON again).
General| Brand | Victron energy |
|---|---|
| Model | Phoenix 12/500 |
| Category | Inverter |
| Language | English |
General overview of Victron Phoenix inverters, their packaging, and cabinet features.
Details on the inverter model coding, voltage, and output specifications.
Protection against short-circuits, including current limits and shutdown behavior.
Limits for short-term and surge power delivery, overload indication.
Monitoring of electronics temperature, shutdown, and restart mechanisms.
Protection against low DC input voltage for 12V and 24V batteries, and alarm indication.
Protection against high DC input voltage for 12V and 24V batteries.
Electronic protection against reverse polarity connection of battery cables.
Protection against high input voltage ripple and associated alarm indications.
Recommendations for installing the inverter in a dry area with good ventilation.
Required equipment and battery cable specifications for installation.
Overview of AC output, earth, remote panel, and battery connections on the PCB.
Step-by-step procedure for connecting the DC battery cables to the inverter.
Procedure for connecting external 230 VAC equipment to the inverter's AC output.
Instructions for connecting remote control switches and indicator LEDs.
Important notes on input voltage ripple and battery charger usage.
Explanation of the function of each LED indicator on the inverter's front panel.
How to use the switch to turn the inverter on, off, or into economy mode.
How the inverter indicates an overload condition and its automatic shutdown behavior.
Indication and shutdown due to low input voltage or battery issues.
Indication and shutdown due to high ambient or component temperatures.
Procedure for adjusting output voltage using potentiometers.
Details on how the economy mode functions and its activation thresholds.
Recommended maintenance, primarily yearly inspection of connections.
General advice for tracing common inverter faults before troubleshooting.
Table of common problems, possible causes, and solutions for inverter issues.
Specific troubleshooting step for low AC output voltage using potentiometer R15.
Specifications for nominal and range input voltages, and switch-on/off voltages.
Specifications for output voltage, frequency, waveform, power, and temporary power.
Specific parameters for the economy mode, including switch-on/off loads.
General specifications covering cooling methods and protection against environmental factors.
Mechanical details including case material, dimensions, weight, and connection types.
Detailed dimensional drawings of the Victron Phoenix inverter.
Diagrams illustrating LED indicators, switch, and connection points.
To Next Page
