8
Charger inverter
mains on
inverter on
on
Bulk
overload
off
absorption
low battery
Float
charger
only
temperature
The electronics temperature is
becoming critical.
Charger inverter
mains on
inverter on
on
Bulk
overload
off
absorption
low battery
Float
charger
only
temperature
The inverter has switched off due to
the electronics temperature being
too high.
Charger inverter
mains on
inverter on
on
Bulk
overload
off
absorption
low battery
Float
charger
only
temperature
-If the LEDs are flashing alternately,
the battery is nearly exhausted and
the nominal output is being
exceeded.
-If "overload" and "low battery" flash
simultaneously, the ripple voltage
on the battery terminal is too high.
Charger inverter
mains on
inverter on
on
Bulk
overload
off
absorption
low battery
Float
charger
only
temperature
The inverter switched off due to
excess ripple voltage on the battery
terminal.
To Next Page
Loading...
Need help?
General
