Need help?Do you have a question about the Victron energy Phoenix Smart IP43 and is the answer not in the manual?
General| Brand | Victron energy |
|---|---|
| Model | Phoenix Smart IP43 |
| Category | Battery Charger |
| Language | English |
Enables wireless setup, monitoring, and updating of the charger via smart devices.
Allows wired connections to other Victron devices or PCs for data exchange.
Offers flexibility for event-based activation, such as alarms or other events.
Achieves high efficiency, generating less heat and consuming minimal power when idle.
Features low thermal load, overheating protection, and natural convection cooling.
Adjusts charging voltage based on ambient temperature for optimal battery health.
Optimizes charging phases to prolong battery life by limiting corrosion.
Reduces charging voltage for long-term storage to minimize battery degradation.
Recovers sulfated batteries by charging them at a higher voltage with low current.
Provides specific charging algorithms for LiFePO4 batteries, handling voltage sensitivity.
Allows the charger to be switched on or off remotely via pin connections.
Indicates errors with a red light, with status LEDs providing blink codes for diagnosis.
Compensates for voltage drop in DC cables by adjusting output voltage based on current.
Offers models with three isolated outputs for charging multiple batteries simultaneously.
Choose the correct charging algorithm (Normal, High, Li-ion, Custom) for different battery types.
Details the specific charging algorithm and low-temperature cut-off for LiFePO batteries.
Allows custom charging profiles to be programmed via Bluetooth or VE.Direct interface.
Explains how loads affect charging and notes limitations for reconditioning.
Outlines the conditions that trigger a new charging cycle, such as mode button press or power cycling.
Provides formulas to estimate lead-acid and Li-ion battery charging times.
Describes how the charger can function as a regulated DC power supply for loads.
Details the material, color, and connection types used in the charger's housing.
Lists the safety, emission, immunity, and vibration standards the charger complies with.
To Next Page