Last update: 2020-09-29 09:56 vedirect_lorawan https://www.victronenergy.com/live/vedirect_lorawan
https://www.victronenergy.com/live/ Printed on 2020-09-30 06:30
Bandwidth and frequencies
warning: Unsupported Frequencies We do not support the TTN AU923 Frequency for Australia,
only the AU915Mhz. Please make sure your gateways are on the correct frequency.
Whilst it's free to use, and long range, LoRaWAN is not high bandwidth. Therefore data is only sent
once an hour …some less important data is only sent once every 24 hours. (See below for more
information.)
Frequencies used by the LoRaWAN module differ by region and country. We stock three different
versions:
ASS030538010 - VE.Direct LoRaWAN EU863-870 module
ASS030540010 - VE.Direct LoRaWAN US902-928 module
ASS030542010 - VE.Direct LoRaWAN AU915-928 module*
The EU version can be used in most of Europe and certain countries in Africa. The US model can be
used in the Americas.
Product compatibility
This module has one VE.Direct port and is compatible with:
All MPPT Solar Charge Controllers which have a VE.Direct Port
BMV Battery Monitor 700 series
BMV Battery Monitor 712 Smart series
SmartShunt
Phoenix Inverter VE.Direct models
The module is not compatible with our Peak Power Packs - even though they have a VE.Direct Port.
More information is also available on our website:
https://www.victronenergy.com/panel-systems-remote-monitoring/ve-direct-lorawan
Installation
What's in the box?
VE.Direct LoRaWAN module, with 1.5m VE.Direct cable
RPSMA Antenna
1.5m power cable with 3A inline fuse and M10 eyelets.
Quick-install guide
Assembly instructions
Screw the antenna onto the LoRaWAN Module1.
To Next Page
Loading...
Need help?
General