Need help?Do you have a question about the Vident iLink Series and is the answer not in the manual?
General| Brand | Vident |
|---|---|
| Model | iLink Series |
| Category | Test Equipment |
| Language | English |
Explains how the scan tool identifies the vehicle for testing.
Process of automatically retrieving the vehicle's VIN for identification.
Procedure for manually entering the vehicle's VIN code.
How to select a vehicle by choosing sub-brand, model year, and engine size.
Menu for selecting vehicle systems to perform tests on.
Performs an automatic test of all installed control modules on the vehicle.
Displays available controllers for a specific vehicle manufacturer for testing.
Core functions like reading codes, live data, and ECU information.
Reads trouble codes (DTCs) stored in the vehicle's control units.
Clears current and stored Diagnostic Trouble Codes (DTCs) from a module.
Displays a snapshot of vehicle operating conditions when a DTC was set.
Allows viewing and recording real-time PID data from vehicle control modules.
Displays all supported Parameter IDs (PIDs) for the selected system.
Accesses vehicle-specific subsystem and component tests.
Performs active tests by sending commands to vehicle ECUs to drive actuators.
Reads stored, pending, and permanent Diagnostic Trouble Codes (DTCs).
Clears current and stored DTCs from a selected control module.
Allows viewing and recording real-time PID data from vehicle control modules.
Real-time viewing of vehicle's electronic control unit's PID data.
Controls vehicle components to test their operation.
To Next Page