Need help?Do you have a question about the Videofied WIP730 and is the answer not in the manual?
Instructions for connecting the panel to a network via Ethernet.
Step-by-step guide for securely installing the panel on a wall.
Guide for inserting and preparing the Mini-SIM card.
Setting a unique code for installer access and system maintenance.
Configuring which events are sent to the monitoring station.
Configuring the panel's mobile network connection parameters.
Setting up DHCP or static IP addresses for the Ethernet interface.
Connecting the panel to a Wi-Fi network via AUTO, WPS, or MANUAL.
Entering IP, Domain Name, and Port for the monitoring server.
Evaluating the quality and strength of the 2G3G connection.
Managing IP addresses via DHCP or static assignment for Ethernet.
Selecting the operating mode for continuous Ethernet connection.
Options for event reporting: ALARM, ALARM/END, NOT TRANSMITTED.
Procedure for changing how specific events are reported.
Common errors encountered when entering mobile data credentials.
Troubleshooting problems related to mobile network coverage and signal strength.
Information on communicator types, protocols, and security features.
General| Technology | Wireless |
|---|---|
| Frequency | 868 MHz |
| Power source | Battery |
| Battery type | Lithium |
| Detection Range | 12 meters |
| Humidity | 95% non-condensing |
| Compatibility | Videofied alarm systems |
To Next Page
