Videofied WIP730 - TECHNICAL SPECIFICATIONS; Electrical Data and Power Specifications; Transmission and Communicator Specifications; Optional Modules and Video Specifications

28
8. TECHNICAL SPECIFICATIONS
Power supply
W730 & WIP 720/730
12V
DC
/1A - Wire connection
ELECTRICAL DATA
Backup battery
Battery technology
Rechargeable 3.7V Lithium-ion battery
Battery voltage (Fully charged)
4.1 V
Low battery level
3.95 V
Guaranteed autonomy when the low battery level is reached
36h
Average current consumption in standby mode
600 μA
Max consumption
1 A
Tamper Detection
Tamper
Wall and cover tamper detection
BOX
Physical and Environmental Data
Operating temperature
-10°/+55°C
Maximum relative humidity
75%, non-condensing
International Protection Marking
IP31 / IK06
Material
ABS—ULV0
RF S2View
®
technology
Radio type
Bidirectional RF
Operating frequency
920MHz - FHSS - W730 & WIP720/730 (Australia, South America)
Transmission security
AES encryption algorithm
Radio jam detection
Ye s
Supervision
Ye s
Radio Antenna
integrated
Communicator
Communicator type
3G (W730)
LAN Ethernet (WIP720)
3G & LAN Ethernet (WIP730)
Security protocol
Frontel
IP stack
TCP/IP
Video transmission
By Frontel protocol to central monitoring station or App servers
2G3G Antenna
Integrated
TRANSMISSION
Optional modules
Wi-Fi
WWB100 (WLAN 802.11 b/g/)
Wired Input/Outputs
WIO100 (out of NF&A2P compliance)
Wired Siren
WIS100
Video
Video Format
WMV or MPEG
Images per second
5
Image size
320x240 or 640x480 pixels
Video length
4 to 12 seconds
Miscellaneous
Programming
Keypad
Max number of devices
24
Max number of codes/badges
50
Arming modes
4
Areas
4
Event log
4000 events stored on flash memory
Dimensions
Panel
143 mm x 200 mm x 44 mm
Installation / Mounting
Control Panel / Base
Two screws secures control panel cover to base
Three screws secure control panel base to the wall
INSTALLATION MANUAL
V
ideo Alarm Technologies Pty Ltd.
Enquiries: + 61 7 5491 7415 / 1300 46 44 55
Info@videoalarmtechnologies.com.au
www.videoalarmtechnologies.com.au