Need help?Do you have a question about the Videofied XT-iP 210 and is the answer not in the manual?
Steps to power the panel, insert backup batteries, and initiate the reset and configuration process.
Setting the installer code, confirming it, and initial system setup steps like language selection and radio range tests.
Defining the network strategy (ETH+2G3G) and configuring 2G3G/GPRS connection parameters like APN and credentials.
Detailed setup for IP address, DHCP, and Ethernet connection status checks for network integration.
Guide to adding, configuring, and deleting system devices like keypads and badges through the programming menu.
Methods for arming and disarming the XT-iP system using the embedded or remote keypad, keyfob, or badge reader.
Procedures for creating, assigning, and managing user access levels, badges, and codes, including reserved codes.
Setting up static or dynamic IP addresses, IP Mask, Gateway, and DNS for Ethernet connectivity.
Key electrical requirements, power supply, battery life, average current, and GPRS transmission specifications.
General| Operating frequency | 868 MHz |
|---|---|
| Operating temperature | -10°C to +55°C |
| Communication | Ethernet, GPRS |
| Outputs | 2 |
| Certifications | EN50131 |
To Next Page
