Why are my Videofied Control Panel devices not sending video clips?
If your Videofied Control Panel is sending events but not video clips, it might be due to a preceding event, such as an arming signal or door contact, preventing the video from automatically downloading because it is not the primary event.
What to do if the Videofied XT-IP 630 Control Panel monitoring station is not getting video but is getting signals?
If the Monitoring Station receives signals from your Videofied Control Panel but no video, check for faulty devices and bring the devices back to the Control panel to force transmit video.
General| Operating Frequency | 868 MHz |
|---|---|
| Number of Wireless Zones | 25 |
| Battery Life | 4 years |
| Operating Temperature | -10°C to +55°C |
| IP Communication | Yes |
| Battery Backup | Yes |
| Outputs | 2 relay outputs |
| Weight | 1.2 kg |
| Humidity | 95% non-condensing |
| Event Log | 4, 000 |
| Power Supply | 12V DC |
| Communication | IP, GPRS |
| Inputs | 2 |
| Radio Technology | S2View® – Spread Spectrum, Bi-Directional |
To Next Page
