Rev AA Introduction 2-1
2
Safety
Introduction
The policy of Videojet Technologies Inc. is to manufacture non-contact
printing/coding systems and ink supplies that meet high standards of
performance and reliability. We enforce strict quality control techniques to
eliminate potential defects and hazards in our products.
The intended use of the printer is to print information directly onto a
product. Use of this equipment in any other fashion may lead to serious
personal injury.
The safety guidelines provided in this chapter are intended to educate the
operators on all safety issues so that the printer is serviced and operated in
a safe manner.
General Safety Guidelines
• Always refer to the correct service manuals as per the specific Videojet
printer model for important details.
• Only Videojet-trained personnel must carry out installation and
maintenance work. Any such work undertaken by unauthorized
personnel may damage the printer and will invalidate the warranty.
• To avoid damage to the printer components, use only soft brushes and
lint free cloths for cleaning. Do not use high pressure air, cotton waste,
or abrasive materials.
• The printhead must be completely dry before attempting to start the
printer, otherwise the printhead may get damaged.
• Do not fit or remove any connector on the printer when the power is
turned on, otherwise the printer may get damaged.
To Next Page
Loading...