To Next PageTo Next PageHow to fix no sound on Videotree TV?
If your Videotree TV has no sound, first, ensure that the mute function is not activated by pressing the Mute button. Then, verify that the volume isn't set too low by pressing the VOL+ button. Also, check the connection between your TV and any external speakers to ensure they are properly connected.
What to do if my Videotree TV says no signal?
If your Videotree TV displays a 'No Signal' message, first, make sure the correct source is selected. Next, check that the cable connecting your TV to the source equipment is properly connected. Finally, ensure that the external equipment is powered on and set to display video on the appropriate output port.
Covers safe PSU connection, earthing, and avoiding back cover removal.
Warns against sunlight, requires 2-person install, notes water resistance limits.
Provides required wall cut-out dimensions for TV installation, with and without a backbox.
Details the initial steps for installing the TV, including mounting the frame and sealing.
Explains how to mount the TV into the frame and connect the power supply.
Covers restoring defaults, adjusting sensitivity, and configuring beep/LED feedback.
Provides a troubleshooting guide for common issues like no power, no signal, or no sound.
General