To Next PageTo Next Page
Need help?Do you have a question about the Videotron EMG2926-Q10A and is the answer not in the manual?
Describes the process of resetting the device to its factory default configuration.
Provides steps on how to connect to and access the device's Web Configurator.
Guides on how to launch and start the connection setup wizard.
Details the process of configuring the device for Internet access.
Explains how to configure the IPoE Internet connection type.
Explains how to configure the PPPoE Internet connection type.
Guides on how to change the device's administrator password.
Details how to set up the wireless network with no security.
Explains how to configure WPA2-PSK security for wireless networks.
Describes how to view and configure parental control rules for network access.
Explains how to enable the firewall to protect the network from attacks.
Guides on configuring the device for Internet access.
Provides a tutorial on setting up a wireless network using WPS.
Explains the easiest WPS method using the push button configuration.
Details the WPS method using a Personal Identification Number (PIN).
Provides a tutorial for configuring wireless security settings manually.
Explains how to configure and use multiple SSIDs for independent wireless networks.
Details setting up security for each individual SSID profile.
Guides on changing the device's Internet access settings.
Guides on configuring the wireless LAN SSID and security settings.
Explains how to select and configure wireless security modes.
Guides on configuring WPA-PSK and WPA2-PSK security for wireless networks.
Explains how to prioritize services like VoIP and video for better performance.
Guides on changing the IPv4 address for the EMG2926-Q10A.
Explains how to forward incoming service requests to local servers.
Details how to edit individual port forwarding rules.
Details how to use the Ping tool to test network connectivity.
Explains how to trace the route packets take to a host.
Guides on using Nslookup for DNS resolution (IP to hostname and vice versa).
Details how to test the Internet connection speed.
Addresses issues related to device power, connections, and LED behavior.
Troubleshoots problems related to accessing and logging into the device.
Provides solutions for issues with accessing the Internet.
Explains the process of resetting the device to factory defaults.
Troubleshoots issues related to wireless network connectivity.
Addresses problems encountered with connected USB devices.
General