Two Wire Videokit ESVK Series
PrtCode:ESVK_ENG_1.3 – Pag.16/24
23/10/2008 Rev.1.3
Art.2301/4
Entrances exchanger for VX2300 digital systems
Fig.1 Fig.2
DESCRIPTION
This unit allows to exchange the bus signal between 4 entrances on system with multiple entrances. It has 4 inputs for 4 door stations, two power supply
inputs (to use both when required) and one bus output
CONNECTION TERMINALS AND JUMPERS
Terminal/Jumper Description
BUS-
BUS+
BUS Output (polarized only when directly connected to the power supply)
IN1
Door station input 1
IN2
Door station input 2
IN3
Door station input 3
IN4
Door station input 4
PS1
Power Supply input 1
PS2
Power Suppy input 2
SPECIFICATION
Housing/Mounting
9 Module A Type DIN box / DIN Bar or directly to the wall
Push Buttons
N/A
Programming
N/A
Controls
N/A
Power Supply
From specific power supply or from the bus
Working Temperature
-10 +50ºC
CUSTOMER SUPPORT INFORMATION
All Countries Customers UK Customers
VIDEX Electronics S.p.A.
www.videx.it
– technical@videx.it
Tel.+39 0734 631669
Fax +39 0734 632475
VIDEX Security LTD
www.videx-security.com
Tech Line 0191 224 3174
Fax 0191 224 1559
The product is CE marked demonstrating its conformity and is for distribution within all
member states of the EU with no restrictions.
This product follows the provisions of the European Directives
89/336/EEC & 92/31/EEC (EMC),
73/23/EEC (LVD) and 93/68/EEC (CE marking).
Il prodotto è marchiato CE a dimostrazione della sua conformità e può essere distribui-
to liberamente all’interno dei paesi membri dell’unione europea EU.
Questo prodotto è conforme alle direttive Europee
89/336/EEC & 92/31/EEC (EMC),
73/23/EEC (LVD) e 93/68/EEC (Marcatura CE).
To Next Page
Loading...
Need help?
General