Need help?Do you have a question about the Viega Megapress and is the answer not in the manual?
Defines the intended audience for this manual, focusing on trained professionals.
Explains warning symbols and notes used throughout the document for safety and information.
Clarifies that the manual is based on European/German standards and may serve as a recommendation elsewhere.
Lists applicable German/European standards and regulations for different product aspects.
Specifies the approved applications and media for the Megapress system, highlighting restrictions.
Details the approved applications, including industrial, heating, and fire extinguishing systems.
Lists suitable media such as heating water, compressed air, and technical gases.
Provides a detailed description of the Megapress system components and their features.
Introduces the system as press connectors for thick-walled steel pipes.
Covers pipe dimensions, types (seamless/welded), quality, and specifications.
Details the shapes, materials, and the SC-Contur safety feature of the press connectors.
Explains the EPDM sealing elements, their usage conditions, and specifications.
Describes the various markings on press connectors and their meanings.
Provides crucial information for using the system, including corrosion considerations.
Discusses the zinc-nickel coating for external corrosion protection and pipe requirements.
Outlines essential precautions for safely transporting pipes and components.
Provides guidelines for storing components to ensure their integrity and prevent damage.
Contains general information and specific instructions relevant to the assembly process.
Focuses on checking system components for damage or contamination before installation.
Emphasizes the critical safety requirement of integrating the piping system into potential equalization.
Details the conditions and procedures for replacing sealing elements with genuine spare parts.
Specifies minimum distances for pipe clamps, welding seams, and bending points.
Lists the specific tools, press machines, and jaws needed for the pressing process.
Presents detailed, step-by-step instructions for assembling the Megapress system.
Guides on safely removing and inserting sealing elements, with cautions.
Explains pipe cutting techniques and necessary precautions to prevent leaks.
Highlights the importance of deburring pipe ends to protect sealing elements and ensure proper fit.
Details the process of preparing the pipe and executing the press connection.
Outlines the mandatory leakage test procedure and relevant regulations before commissioning.
Instructs on the proper separation and disposal of product and packaging materials.
To Next Page
General