What to do if my Viega Power Tool press machine switches off during pressing?
If your Viega Power Tool press machine switches off during pressing and the LED flashes, it's likely the battery is almost flat. Replace it with a fully charged battery.
What to do if Viega Picco 6 press jaw cannot be opened after pressing?
If the press jaw cannot be opened after a pressing with your Viega Power Tool, actuate the Reset button and take the press jaw from the press connector. Then, check the press jaw and have it repaired if required, as the press may have been unable to be completed.
What to do if my Viega Power Tool displays a temperature symbol?
If the LED flashes 2x with pauses, the display repeats, and the temperature symbol illuminates on your Viega Power Tool, it indicates the machine is outside the permissible temperature range. Set the press machine and battery, located in well-ventilated surroundings, to the recommended temperature range.
General| Brand | Viega |
|---|---|
| Model | Picco 6 |
| Category | Power Tool |
| Language | English |
Information for heating and plumbing experts and trained personnel.
Explains warning symbols like DANGER, WARNING, CAUTION, NOTICE.
Explains the scope and basis of the translated instructions.
Lists terms and their abbreviated forms used in the manual.
Lists applicable standards and regulations for Germany/Europe.
Provides general safety instructions applicable to electrical tools.
Details crucial safety measures related to electrical aspects of tools.
Details essential personal safety measures for operating tools.
Instructions for using and maintaining power tools correctly.
Guidelines for safe operation and maintenance of battery tools.
Information on servicing power tools by qualified personnel.
Core safety principles for tool operation and work practices.
Defines the intended application of the press machine.
Lists the components included in the scope of delivery.
Illustrates and labels the main components of the Pressgun 6.
Details control elements on the rechargeable battery and charger.
Illustrates correct gripping points for safe operation.
Presents detailed technical specifications for the press machine.
Explains the information found on the product's specification plate.
Lists recommended original accessories for the press tools.
Explains how the electro-hydraulically operated press machine functions.
Describes the press machine's display, control process, and standby mode.
Explains LED indicators, start button, reset button, and cylinder head.
Provides essential guidelines for safe transport and storage.
Step-by-step guide for setting up and preparing the machine.
Instructions for performing the pressing operation correctly.
Explains how to interrupt or cancel a pressing operation.
Lists common faults, their causes, and solutions.
Covers cleaning, performing checks, and general inspection.
Specifies maintenance intervals and explains related labels.
Provides guidelines for environmentally friendly disposal.
Details the warranty period and conditions for Viega tools.
Provides the EC Declaration of Conformity for the product.
Lists contact information for service and repair partners.
To Next Page