2.6. Installing
Leave an unobstructed air gap of at least 20 cm above the
cabinet.
When installing the cabinet, make sure of the following:
• The area where the cabinet is placed is flat and level.
• No objects are placed on top of the cabinet.
• The cabinet is not placed in the immediate vicinity of a heat
source such as a radiator, air blown heater or spotlight.
See figure A.
• The cabinet is not exposed to direct sunlight. If necessary,
use blinds in any nearby window. See figure B.
• The air conditioning for the premises does not blow onto
the cabinet. See figure C.
The correct positioning of the cabinet optimises temperature conditions and performance.
Cabinets with castors / wheels may be anchored to the wall behind them as a safety
precaution.
2.7. Cleaning before use
Follow the instructions provided with the detergent.
Make sure that all cleaning fluids are classed as non-toxic.NOTE
ENGLISH
To Next Page
Loading...
