Viessmann Vitocal 200-A - Required parameter settings

Required parameter settings
ID: 4605093_1304_05
Vitotronic 200, type WO1B
Parameter Value Function
7000 10 With heating circuit A1/HC1, M2/HC2, M3/HC3, DHW cylinder
71FE 1 Enable active cooling
7100 3 Active cooling
7101 2 Cooling on heating circuit M2/HC2
7103 180 Min. flow temperature, cooling
7A00 1 With Vitosolic 100, type SD1
3003 1 Vitotrol 200A remote control activated for heating circuit M2/HC2
ID: 4605093_1304_05
Vitosolic 100, type SD1
Parameter Value Function
ANL 2 System version
"RPM" "0" Pump with electronic speed control (delivered condition)
"1" Standard solar circuit pump without separate variable speed control - speed controlled by
pulse pack control
"2" Pump with PWM input (Wilo)
"3" Pump with PWM input (Grundfos)
Vitocal 300-A/350-A
(cont.)
System examples
VIESMANN
215
5822 472 GB
7