Take advantage of these benefits
Brine/water heat pump
Heating outputs, single-stage: 5.9 to 42.8 kW, 2 stage: 11.8 to 85.6 kW
Water/water heat pump
Heating outputs, single-stage: 7.9 to 58.9 kW, 2 stage: 15.8 to 117.8 kW
High Coefficient of Performance: COP value to EN 14511 up to 4.8 (brine 0 °C/
water 35 °C) COP up to 6.0 (water 10 °C / water 35 °C)
Mono-mode operation for central and DHW heating
Quiet operation through hermetically sealed Compliant scroll compressor and
sound insulation
With 60 °C flow temperature, suitable for radiator and underfloor heating
Heat pump control unit with user prompts for weather-compensated heating
operation and natural cooling or active cooling
Vitocal 300-G: brine pump, heating circuit pump and safety assembly are
integrated (type BWC and WWC)
Optional installation of an electrical booster heater, for example for screed drying
Optimised control characteristics and therefore reduced
consumption costs – the Vitocal 300-G is equipped with an
electronic expansion valve that ensures particularly high
seasonal performance factors.
Two-stage heat pump Vitocal 300-G (master/slave) –
a pipework set with fittings and shut-off valves is available
for the hydraulic connection of the heat pump modules.
Fully wired cables are used to connect the control unit.
2/3
To Next Page
Loading...
