What to do if red fault indicator A flashes and displays "Fault" on Viessmann Boiler?
If the red fault indicator A flashes and displays "Fault", select "Fault" in the standard menu to list the current faults.
How to delete fault history on Viessmann VITOLADENS 300-W Boiler?
To delete the fault history, press the OK and å buttons simultaneously for approximately 4 seconds.
General| Model | VITOLADENS 300-W |
|---|---|
| Category | Boiler |
| Efficiency | Up to 98% |
| Fuel Type | Natural Gas / Propane (LPG) |
| Installation | Wall-mounted |
| Heat Exchanger | Inox-Radial stainless steel |
| Operating pressure | 3 bar |
| NOx emissions | Class 5 |
| Control | Vitotronic control unit |
Guidelines for safe system operation.
Safety advice for performing repair work on the system.
Guidance on pre-installation steps and site preparation.
Step-by-step guide for fitting the boiler and making connections.
Instructions for connecting the flue gas system.
Details on connecting the condensate drain pipe.
Guidance for setting up the oil supply line.
Procedure for safely opening the control unit housing.
Details on wiring and connecting electrical components.
Steps for closing the control unit and installing the programming unit.
List of steps for commissioning, inspection, and maintenance.
Detailed instructions for specific tasks like removing panels and filling.
Procedure for configuring the control unit for the system.
Procedure to access and navigate coding level 1.
Procedure to access and navigate coding level 2.
Procedure to access the service menu and diagnostic options.
How to identify and understand fault indicators on the unit.
Reference list of fault codes and their causes/measures.
Procedures for checking and repairing components.
Explanation of control unit operations and heating modes.
To Next Page