Viessmann VITOPEND 200 WHKA User Manual

VITOPEND 222 Type WHSA
Gas fired boiler with an integral primary cylinder
Fully automatic
With modulating atmospheric burner for open flue opera-
tion
or
With modulating pressure-jet burner for balanced flue
operation
Control unit for constan t temperatur e or wea ther-compen-
sated operation is included in the equipment price
For natural gas and LPG
VIESMANN
Datasheet
Part numbers and prices: see pricelist
VITOPEND 222
Gas fired boiler with an integral primary cylin der for open or ba lanced flue
operation
10.5 to 24 (30) kW
File in: Vitotec folder, register 5
5822 335-1 GB 3/2006

Viessmann VITOPEND 200 WHKA Specifications

General

Brand	Viessmann
Model	VITOPEND 200 WHKA
Category	Boiler
Language	English

Summary

Datasheet

Specifications

DHW primary cylinder

Flue gas values

Pre-installation and Installation

Clearance for maintenance work

Pre-installation: finished walls

Mounting frame for finished walls

Pre-installation: unfinished walls

Electrical connection

Vitopend Installation Accessories

Installation template for finished walls

Installation template for unfinished walls

Vitotronic Control Unit Accessories

Vitotronic 100, type HC1 (constant temperature mode)

Overview of the structure and functions of the Vitotronic 100 control unit.

Vitotrol 100, type UTD

Vitotronic 200, type HO1 (weather-compensated mode)

Overview of the structure and functions of the Vitotronic 200 control unit.

Vitotrol 200

Vitotrol 300

Room temperature sensor

Vitocom 100, type FA1

Vitocom 300, type FA3, FE1 and FI1

Basic module (standard delivery, Vitocom 300)

Design information

Installation for balanced flue operation

Requirements for installing the boiler with balanced flue operation.

Installation for open flue operation

Requirements for installing the boiler with open flue operation.

Operating Vitopend in wet areas

System design

Recommendations for system design and flow temperatures.

Water quality/Frost protection

Guidelines for water quality and frost protection.

Sizing the diaphragm expansion vessel for heating water

Guidance on sizing the diaphragm expansion vessel.

Sizing the expansion vessel

Method for sizing the expansion vessel.

Balanced Flue System Accessories

Vertical pitched and flat roof outlet, coaxial, system size Ø 60/100 mm

Details on vertical/flat roof outlets for coaxial flue systems.

Vertical pitched and flat roof outlet, parallel, system size Ø 80/80 mm

Details on vertical/flat roof outlets for parallel flue systems.

Separate ventilation air and flue pipes (type C52), parallel, system size Ø 80/80 mm

Details on separate air/flue pipes for parallel systems.

External wall terminal (type C12), parallel, system size Ø 80/80 mm

Details on external wall terminals for parallel systems.

Vertical pitched and flat roof outlet, coaxial, system size Ø 80/125 mm

Details on vertical/flat roof outlets for coaxial systems.

External wall terminal and horizontal roof outlet (type C12x), coaxial, system size Ø 80/125 mm

Details on external/horizontal roof outlets for coaxial systems.

External wall terminal

Horizontal roof outlet

Open Flue System Accessories

Flue gas system Ø 140 mm

Details on flue gas system components for Ø 140 mm.

Flue gas connection

Guidelines and requirements for flue gas connections.

Combustion ventilation through apertures leading outside