To Next PageTo Next Page
Need help?Do you have a question about the Viessmann VITOSOL 200-T SP2A and is the answer not in the manual?
General| Type | Evacuated tube collector |
|---|---|
| Absorber Area | 2.1 m² |
| Number of Tubes | 12 |
| Maximum Operating Pressure | 10 bar |
| Aperture area | 2.1 m² |
| Absorber material | Copper |
| Maximum operating temperature | 120°C |
| Connection size | 22 mm |
| Length of Tubes | 1.8 m |
| Width | 1.03 m |
Detailed description of the Vitosol 200-T SP2A vacuum tube collector's features and capabilities.
Key advantages of the Vitosol 200-T SP2A vacuum tube collector, highlighting efficiency and installation flexibility.
Information on how the Vitosol 200-T SP2A vacuum tube collector is packed and delivered.
Detailed technical data and dimensions for Vitosol 200-T models including areas, dimensions, and performance metrics.
Details on the quality certifications and testing standards met by the Vitosol 200-T collectors.
Details on the roof bracket system for Vitosol 200-T collector installation, including components and forces.
Information on collector supports for flat roof installations, including fixed and adjustable angle options.
Guidance on substructure ballast and load calculations for flat roof installations as per DIN standards.
Methodology for calculating collector row clearance (z) to prevent shading in flat roof installations.
Details on horizontal installation of Vitosol 200-T collectors on walls, including balcony mounting.
Examples of connecting Vitosol 200-T collectors in single rows, multiple rows, and arrays for optimal performance.
Chart illustrating the pressure drop in Vitosol 200-T collectors relative to flow rate for different models.
Required flow rates for individual Vitosol 200-T collector models in high, medium, and low-flow modes.
Recommended flow rates for Vitosol 200-T collector arrays of various sizes and configurations.
