Need help?Do you have a question about the Viessmann Vitotrol 100 UTDB-RF2 and is the answer not in the manual?
General| Temperature Range | 5 to 30 °C |
|---|---|
| Compatibility | Viessmann heating systems |
| Mounting | Wall-mounted |
| Display | LCD |
| Operating Frequency | 868 MHz |
| Power Supply | Batteries |
| Communication | Radio Frequency (RF) |
| Range | Up to 30 meters |
Explains warning symbols and terms used in the manual for safety.
Specifies intended users and relevant regulations for system work.
Details immediate actions and precautions to take if a gas leak is detected.
Describes the Vitotrol 100's role in maintaining room temperature and managing heating modes.
Provides guidelines for selecting an optimal location for the Vitotrol 100 and wireless receiver.
Step-by-step guide for installing and connecting the wireless receiver to the control unit.
Instructions for opening the device, fitting the wall mounting base, and assembling the unit.
Procedure for initial setup, language selection, and date/time setting on the Vitotrol 100.
Details on pairing the Vitotrol 100 with its wireless receiver and checking LED indicators.
Steps to test signal strength and verify switching outputs for heating and DHW.
Procedure to change the wireless address code if the connection between devices fails.
Lists applicable standards and directives, along with product serial number and contact information.
To Next Page
