Viessmann Vitotrol 100 UTDB-RF2 User Manual

12
1. Open the hinged flap.
2. Use a pointed object to press
"Reset".
3. Select language with / .
4. Confirm with OK.
5. Set current date and time with / .
6. Confirm with OK.
Commissioning the wireless receiver
8
A
B
Q ë r w
A
LED
Operating display
Address recognition
Service function
r
Heat demand for central heat-
ing
Heat demand for DHW heating
Several Vitotrol 100 and the wireless
receiver can be installed in one building.
Each set is matched in the factory. Each
Vitotrol 100 can only communicate with
its allocated wireless receiver.
Note
If LED
r
flashes, the wireless receiver
has not recognised the signal from the
Vitotrol 100. In this case, change the
address code (see page 14).
Commissioning
Commissioning the Vitotrol 100
5461 060 GB

Viessmann Vitotrol 100 UTDB-RF2 Specifications

General

Brand	Viessmann
Model	Vitotrol 100 UTDB-RF2
Category	Temperature Controller
Language	English