[
12
]
[English]KEN001AKI 18.09.2017 • v09
Using your induction hob
To start cooking
1. Touch the ON/OFF control.
After power on, the buzzer beeps once, all displays
show “ – “ or “ – – “, indicating that the induction
hob has entered the state of standby mode.
2. Place a suitable pan on the cooking zone that
you wish to use.
• Make sure the bottom of the pan and the surface
Of the cooking zone are clean and dry.
3. Touching the heating zone selection control,
and the indicator next to the key will ash.
3. Touching the heating zone selection control,
and the indicator next to the key will ash.
4. Select a heat setting by touching the or control.
• If you don’t choose a heat setting within 1 minute,
the Induction hob will automatically switch o.
You will need to start again at step 1.
• You can modify the heat setting at any time during
cooking.
To Next Page
Loading...