Viesta TH12 - Parameter Settings; Configuration Parameters; Preset Temperature Mode; Temperature Mode Selection

Version: 8.0
19.10.2017
[
EN ● 5
]
PARAMETER SETTINGS
Withtheunitintheoffposition,pressthe"M"and"+"keyssimultaneouslytoaccessthe
parameter setting.
WiththeMkeyyoucannowgototheindividualparameters(01-08).
Tochangesettings,changethevaluewith"+"and"-".
Nr. Parameter Range
01 Temp. Calibration -9
0
C-+9
0
C
02 Upper Temp. Limit 5
0
C - 35
0
C
03 LowestTemp.Limit 5
0
C - 35
0
C
04 Antifreeze(whenshallthe
unitswitchon)
5
0
C - 10
0
C
05 Setting the temperature
increment
0,5-2
06 Antifreezeon/o󰀨 0:O󰀨1:On
08 SoftwareVersion 10073
PRESET TEMPERATURE MODE
Thetemperaturemodecanbesetasfollows:
- PressandholdtheMbuttonforaround3seconds
The comfort modesymbol(
) (Pic. A)willbedisplayed(f.e.25.5°C).
 Changethemodetemperaturebythe+and–buttons.
- Press Mkey,theenergy-saving modewillbedisplayed(
) (Pic. B) (f.e. 20.5°C).
 Changethemodetemperaturebythe+and–buttons.
- Press the Mkey,thevacation modedisplay(
) (Pic. C) (f.e. 10°C).
 Changethemodetemperaturebythe+and–buttons.
Pic. A Pic.B Pic. C
Withthepre-definedtemperaturesettingsyoucannowchooseeachsettingswithjusta
push of a button.