VIETA UNO - Connecting the Antenna; Connecting Assistance Equipment; Connecting Coaxial

5
Connecting the AntennaConnecting the Antenna
Connecting the AntennaConnecting the Antenna
Connecting the Antenna
1. Using the supplied wire Antenna.
2. Using the coaxial type connector .
A 75Ohm antenna with coaxial type connector should be connected to the FM 75 ohm coaxial
terminal.
3. If reception is poor, connect the outside antenna.
Note: Note:
Note: Note:
Note: Before attaching a 75 ohm coaxial lead (the kind with a round wire going to an outside
antenna), disconnect the supplied FM wire antenna.
Caution:Caution:
Caution:Caution:
Caution: To avoid noise, keep antennas away from the system, the connecting cord and the AC
cord.
Connecting Assistance EquipmentConnecting Assistance Equipment
Connecting Assistance EquipmentConnecting Assistance Equipment
Connecting Assistance Equipment
This DVD Player has one groups of AUX IN
terminal, you can use signal line to connect this
player’s AUX IN terminal and assistance
equipment’s audio output terminals respectively,
then you can hear the sound sources.
Caution:Caution:
Caution:Caution:
Caution: When you are connecting AUX audio
terminals, please press the function select button
FUNCTIONFUNCTION
FUNCTIONFUNCTION
FUNCTION
on the DVD Player to select AUX
function.
Connecting CoaxialConnecting Coaxial
Connecting CoaxialConnecting Coaxial
Connecting Coaxial
Use coaxial fibre cable to connect the DVD
player's coaxial fibre output jack with other
amplifier's coaxial fibre input jack, for superior
digital sound effects.
-/0