2.6 Install TF Card
2.7 Image Output Interface
12.
TF (Micro SD card): Install the TF card to the card slot (Re. 2.1 Over-
view). Support max 128GB. Request Class 10 (10m/s) transmission
speed or higher and FAT32 or exFAT format.
HDMI: Micro HDMI output, HD 1080P 60/30fps, 1080P 60fps as de-
fault. (Optional)
AV: no AV output
Ethernet: Ethernet/IP output interface, support RTSP/RTMP/UDP/ON-
VIF video streaming. Default: RTSP output, IP address: RTSP:
//192.168.2.119:554, output resolution: 1080P, frame rate: 30fps, bit
rate: 4M. (Optional)
Make sure device is power off when inserting the TF
card, hot plugging is not supported.
To Next Page
Loading...