Viewpro ZIR35T - 3.1.4 PWM Control Operation: Tracking

17.
Switch from Position 2 to 1: Take a picture
OSD display 'REC IMG' a second.
7) Multi: tracking control
Low Gear
Position 1
Middle Gear
Position 2
High Gear
Position 3
Low Gear
Position 1
Middle Gear
Position 2
High Gear
Position 3
Switch from Position 2 to 1: Cancel tracking
Switch from Position 2 to 3:
Exit the tracking, display the lock frame in the center of the screen,
start tracking
Switch from Position 3 to 2:
"+" appears in the center of the screen, adjust the cross cursor
UDLR with yaw and pitch control to lock target object
Switch from Position 2 to 3 again:
Choose another target for second tracking
Switch from Position 2 to 3: Start record / repeat operation to stop
record
Start record, the OSD display rec hh:mm:ss.
Stop record, the OSD display STBY.