To Next PageTo Next PageHow to fix a ViewSonic CDP5560-L Monitor when no picture is displayed?
If your ViewSonic Monitor displays no picture, first ensure the power cord is properly connected. Then, check if the main power switch on the back of the display is turned on. Also, verify that a signal connection is properly connected to the display. Finally, check if the display is in standby mode.
What to do if I can hear sound but no picture on my ViewSonic Monitor?
If you can hear sound but see no picture on your ViewSonic Monitor, the source signal cable may be improperly connected. Make sure that both video inputs and sound inputs are correctly connected.
What to do if the ViewSonic Monitor picture is distorted?
If the picture on your ViewSonic Monitor is distorted with abnormal patterns, ensure the signal cable is firmly attached. If the issue persists, check that the input signal is within the display's capabilities by verifying its specifications.
Why doesn't my ViewSonic Monitor image fill the screen?
If the display image on your ViewSonic Monitor doesn’t fill up the full size of the screen, the zoom mode may not be correctly set. Use the Zoom mode or Custom zoom function in the Screen menu to fine tune display geometry and time frequency parameter.
How to adjust screen size on ViewSonic CDP5560-L?
If the display image on your ViewSonic monitor doesn't fill up the full size of the screen, the zoom mode may not be correctly set. Use the Zoom mode or Custom zoom function in the Screen menu to fine-tune display geometry and time frequency parameter.
Why is there no sound on my ViewSonic Monitor?
If you can see a picture on your ViewSonic Monitor but hear no sound, first ensure that both the video and sound input cables are correctly connected. If the cables are correctly connected, check if the volume is turned down. Press the [VOL UP] or [VOL DOWN] button to adjust the volume. Also, make sure that [MUTE] is not turned on; if it is, switch it off using the [MUTE] button. Finally, ensure that external speakers are connected and the volume is set to an audible level.
Why is there interference on my ViewSonic Monitor?
If you are experiencing interference or audible noise with your ViewSonic Monitor, it may be caused by surrounding electrical appliances or fluorescent lights. Try moving the display to another location to see if the interference is reduced.
Why does my ViewSonic CDP5560-L have after-images?
If after-images are visible on your ViewSonic Monitor after it's powered off, it may be due to a still picture being displayed for an extended period. To prevent this, avoid displaying still images for prolonged durations, as it can cause a permanent after-image.
Why some pixels of ViewSonic CDP5560-L Monitor do not light up?
If some picture elements on your ViewSonic Monitor do not light up, it is because some pixels of the display may not turn on. The display is manufactured using an extremely high level of precision technology; however, sometimes some pixels of the display may not display and this is not a malfunction.
What to do if I can see the picture but no sound is heard on my ViewSonic CDP5560-L?
If you can see the picture on your ViewSonic monitor but cannot hear any sound, there are several potential causes. First, ensure that both video and sound input cables are correctly connected. Second, the volume might be turned down; press the [VOL UP] or [VOL DOWN] button. Third, check if [MUTE] is on and switch it off. Lastly, if you are not using built-in speakers, connect external speakers and adjust the volume.
General| Resolution | 1920 x 1080 |
|---|---|
| Viewing Angle | 178° horizontal / 178° vertical |
| Response Time | 8ms |
| Panel Type | LCD |
| Aspect Ratio | 16:9 |
| VESA Mount | 400 x 400 mm |
| Screen Size | 55 inches |
| Connectivity | HDMI, VGA, USB |
| Power Consumption | 160 W |
| Speakers | 2 x 10W |
Procedures for unpacking and verifying package contents.
Important notes for safe and proper display installation.
Identifies the control panel buttons and layout on the display.
Explains the function of each button on the control panel.
Detailed explanation of each input/output terminal.
Explains basic functions of the remote control buttons.
Learn how to navigate the On-Screen Display menu using remote or buttons.
Detailed technical specs for CDP4260-L/CDP4262-L models.
Detailed technical specs for CDX4652-L model.
Detailed technical specs for CDP5560-L/CDP5562-L models.
Solutions for common display problems like no picture or abnormal color.
Details what the warranty covers and what it does not cover.
Instructions on how to get warranty service and required information.
