Why does my ViewSonic CDP5560-L have after-images?
If after-images are visible on your ViewSonic Monitor after it's powered off, it may be due to a still picture being displayed for an extended period. To prevent this, avoid displaying still images for prolonged durations, as it can cause a permanent after-image.
Why is there interference on my ViewSonic Monitor?
If you are experiencing interference or audible noise with your ViewSonic Monitor, it may be caused by surrounding electrical appliances or fluorescent lights. Try moving the display to another location to see if the interference is reduced.
Why is there no sound on my ViewSonic Monitor?
If you can see a picture on your ViewSonic Monitor but hear no sound, first ensure that both the video and sound input cables are correctly connected. If the cables are correctly connected, check if the volume is turned down. Press the [VOL UP] or [VOL DOWN] button to adjust the volume. Also, make sure that [MUTE] is not turned on; if it is, switch it off using the [MUTE] button. Finally, ensure that external speakers are connected and the volume is set to an audible level.
How to adjust screen size on ViewSonic CDP5560-L?
If the display image on your ViewSonic monitor doesn't fill up the full size of the screen, the zoom mode may not be correctly set. Use the Zoom mode or Custom zoom function in the Screen menu to fine-tune display geometry and time frequency parameter.
Why doesn't my ViewSonic Monitor image fill the screen?
If the display image on your ViewSonic Monitor doesn’t fill up the full size of the screen, the zoom mode may not be correctly set. Use the Zoom mode or Custom zoom function in the Screen menu to fine tune display geometry and time frequency parameter.
What to do if the ViewSonic Monitor picture is distorted?
If the picture on your ViewSonic Monitor is distorted with abnormal patterns, ensure the signal cable is firmly attached. If the issue persists, check that the input signal is within the display's capabilities by verifying its specifications.
What to do if I can hear sound but no picture on my ViewSonic Monitor?
If you can hear sound but see no picture on your ViewSonic Monitor, the source signal cable may be improperly connected. Make sure that both video inputs and sound inputs are correctly connected.
Procedures for unpacking and verifying package contents.
Important notes for safe and proper display installation.
Identifies the control panel buttons and layout on the display.
Explains the function of each button on the control panel.
Detailed explanation of each input/output terminal.
Explains basic functions of the remote control buttons.
Learn how to navigate the On-Screen Display menu using remote or buttons.
Detailed technical specs for CDP4260-L/CDP4262-L models.
Detailed technical specs for CDX4652-L model.
Detailed technical specs for CDP5560-L/CDP5562-L models.
Solutions for common display problems like no picture or abnormal color.
Details what the warranty covers and what it does not cover.
Instructions on how to get warranty service and required information.
General| Resolution | 1920 x 1080 |
|---|---|
| Viewing Angle | 178° horizontal / 178° vertical |
| Response Time | 8ms |
| Panel Type | LCD |
| Aspect Ratio | 16:9 |
| VESA Mount | 400 x 400 mm |
| Screen Size | 55 inches |
| Connectivity | HDMI, VGA, USB |
| Power Consumption | 160 W |
| Speakers | 2 x 10W |
To Next Page
