22
Selecting a Video Source
Normally the CDP6530 LCD monitor automatically searches for available video sources after it is
turned on. You can also manually select one if multiple video sources are connected to the LCD
monitor.
To select a video source using the control panel:
1. Press the VIDEO SOURCE button on the control panel to display the Input Source menu.
2. Press the VIDEO SOURCE button several times, or press the or button to select an input
source.
To select a video source using the wireless remote control:
1. Press the INPUT button on the remote control to display the Input Source menu.
2. Press the INPUT button several times, or press the or button on the remote control to select an
input source.
You can also press the AV, VGA, DVI, HDMI or YPbPr button according to the video source you wish to
view.
Picture Mode
To Next Page
Loading...
