ViewSonic E70fb - Other Information; Specications

ViewSonic E70fB/E70fSB
10
Other Information
Specifications
CRT
Type
Dot Pitch
Phosphor
Glass suface
17”(16.0” viewable diagonal area). 90
O
deflection,
0.21 mm horizontal, 0.13 mm vertical,
and 0.25 mm diagonal dot pitch
RGB P22, medim short persistence
TM~50%, anti-glare and anti-reflection
Input Signal
Video
Sync
RGB Analog (0.7/1.0 Vp-p, 75 Ohms)
f
H
:30-70 kHz, f
v
:50-160 Hz
H/V Separate (TTL), Composite
Compatibility
PC
Macintosh
1
VGA up to 1280 x 1024
Power Macintosh (may require Macintosh cable adapter)
Resolution
Recommended and
supported
1280 x 1024 @ 60 Hz
1024 x 768 @ 75, 85 Hz
800 x 600 @ 75, 85 Hz
640 x 480 @ 60, 75, 85 Hz
640 x 400 @ 70 Hz
MAC 640 x 480 @ 67 Hz
MAC 800 x 600 @ 75 Hz
MAC 1024 x 768 @ 75 Hz
Power
Voltage AC 100-240 VAC
50/60 Hz
Display Area
Default
Full scan
310 mm(H) x 230 mm(V) (typical)
325 mm(H) x 243 mm(V) (depends on signal timing)
Operating
Conditions
Temperature
Humidity
Altitude
32
O
F to 104
O
F (0
O
C to 40
O
C)
5% to 95% (no condensation)
To 10,000 feet
Storage
Conditions
Temperature
Humidity
Altitude
-40
O
F to 140
O
F (-40
O
C to 60
O
C)
5% to 95% (no condensation)
To 40,000 feet
Dimensions
Physical
(monitor)
410 mm (W) x 405.5 mm (H) x 420 mm (D)
16.1” (W) x 16.0” (H) x 16.5” (D)
Weight
Net 15.0 kg / 33.1 lb (monitor only)
Regulations
MPR II, FCC-B, ICES-B, DHHS
Power Consumption
Modes
On
Sleep
Off
< 75W typical; (Green LED)
< 4W (Orange LED)
< 2W
1
. Macintosh models prior to G3 require a Macintosh adapter. To order a ViewSonic
®
Macintosh adapter, contact
Customer Support. You will need to provide the product serial number.
Note : This product was designed for operation in the magnetic fields of the hemisphere where it was purchased.