Using your monitor
Setting the Timing Mode
Setting the timing mode is important for maximizing the quality of the screen
image and minimizing eye strain. The timing mode consists of the resolution
(example: 1024 x 768) and refresh rate (or vertical frequency, example: 85 Hz).
For the best picture quality set your monitor to: VESA
®
1024 x 768@ 85 Hz.
To set the Resolution:
1 Right-click on the Windows desktop.
2 Click Properties on the drop-down menu.
3 Click the Settings tab.
4 Select the resolution by moving the slider, which displays in the Desktop
area or Screen area in the window.
NOTE: The refresh rate should already be set if you have completed the
ViewSonic Wizard CD installation (or refer to your graphics card’s
documentation).
OSD Lock Settings
You have the option of using the OSD Lock feature to prevent current image
adjustments from being changed.
• OSD Lock: Press and hold [1] and the down arrow
▼ for 10 seconds. If any
buttons are pressed the message OSD Locked will display for 5 seconds.
• OSD Unlock: Press and hold [1] and the down arrow
▼ again for 10 seconds.
ViewSonic E70f+ 5
To Next Page
Loading...
Need help?
General
