ViewSonic EP4602 - Network Setup

ViewSonic
EP2202r_EP3202r_EP4602r_EP5202r
6
B. Network Setup:
The terminal has been set before delivery from factory. You cannot change Machine ID or
MAC Address. You can set Server IP and Get IP Type according to the current network
environment through the remote control.
Press Setup button to enter menu setup home page. Press Up, Down buttons to select
Network Setup, and press Play button to display Network Setup options. There are totally
5 options available: Server IP, Machine ID, MAC Address, Get IP Type and Return to Main
Menu.
Fig. 1-4
1. Server IP:
Select Server IP menu, and press PLAY button to conrm. If you need to modify the Server
IP address, you can press Left arrow to display the numeric soft keyboard. Use the naviga-
tion buttons on the remote control to select numbers on the keyboard. On the soft keyboard, “
” means “clear” while “ ” means “conrm and exit”.
Fig. 1-5 Fig. 1-6