USE OF THE REMOTE CONTROL
Teletext function and buttons will be described on next page.
REMOTE CONTROL
MENU
Press this key to display
main menu.
SLEEP
With this key you can set a
time period after which the
TV should switch itself to
standby. Press the key
repeatedly to select the
number of minutes. The
counter runs from
Off 15
30 45 60 90 120
minutes.The timer begins
to count down from the
number of minutes
selected after the displa
y
has disappeared.
POWER:
Press to turn on/off the
TV. The TV is never
completely powered off
unless it is physically
unplugged.
0~9 DIGIT BUTTONS
To select a TV channel.
Source
Select your input source:
press repeatedly to select TV,
PC, SCART, S-VIDEO,HDTV
or HDMImode, according to
where you connected you
r
external source.
VOL
Press + or – (or MENU
or button) to increase
or decrease
the volume.
MUTE
Temporarily interrupt the
sound or restore it.
CH
Press or (or MENU
▲ or ▼ button) buttons
to scroll through the
channels.
PRE-CH
To display the previously
selected TV channel.
SOUND
To select Mono/ Stereo /Dual
from TV RF input.
OK
Press this KEY to
validate your selection.
DISPLAY
Press this key to display:
(1) the channel number
when watching a TV
programme.
(2) the input source when
watching an AV
programme.
SIZE
Press this key repeatedly to
select desired picture format.
SWAP
Press to swap the two
screens when PIP/POP
works .
PIP/POP
Press this key to display
PIP/POP screen
SUBPAGE
Teletext Sub-page function.
ViewSonic 11 N2060w
To Next Page
Loading...
