ViewSonic N2060w - Page 18

PIP/POP adjustments
Press the MENU button to display the
Main menu
Select the PIP/POP menu using the
Àbutton.
Press the OK button to confirm.
Use the ¿ / À buttons to select each
option.
Dual mode : Using ½ / ¾ buttons activate (PIP/POP) or deactivate (Off) the
PIP/POP function.
Following options are available if you have selected PIP or POP at the PIP line.
Position : use the ½ / ¾ buttons to change the position of the PIP frame on
the screen.
Source : to select video source of the PIP/POP, use the ½ / ¾ buttons to
select video source of the picture in the PIP/POP frame (TV or AV).
You can insert a TV picture while you are viewing an AV programme or insert
an AV picture while you are viewing a TV programme.
Video source can also be selected without the menu, using AV button on the
remote control.
Audio select : to select audio source: MAIN (Main picture) or SUB (PIP/POP
picture), use the ½ / ¾ buttons to select audio source.
Press the MENU button to exit the PIP/POP menu.
Note : this menu is removed automatically after a few seconds without using
the remote control.
ViewSonic 16 N2060w