ViewSonic N2060w - Advanced Channel Settings; Storing and Modifying Channels; System and Skip Settings; Fine Tuning and Manual Search

Store prog.: Allows to Save a channel on a new programme No. or to Insert a
channel on an already existing programme No. (the channel previously saved
on this programme No. will be shifted to the uper programme n..).
- Once a channel has been found and named, use the  button to select the
Store prog. option.
- Using the  /  buttons, select Save or Insert and press the OK button to
confirm.
System: Allows to change the audio norm.
- Using the  button, select the System option.
- Using the  /  buttons, select the norm.
The audio norm change will also change broadcasting system. Not suggest to
change the audio norm if you are not sure the audio system.
Skip : Allows to skip a channel.
- Using the  button, select the Skip option.
- Using the  /  buttons, select On, the channel will be skip.
Repeat this procedure to skip other channels.
Fine tuning : If the picture is not clear, you can adjust the setting.
- Using the  button, select the Fine Tuning option.
- Use the  /  buttons to find the good tuning point.
Manual search : Allows to launch a manual search.
- Using the  button, select the Manual search option.
- Using the  /  buttons, start the search in decreasing or increasing order.
The menu is replaced by a sub-menu showing the progression of the search.
- The search will stop at the first channel found, Manual search menu is
displayed again (within 3 seconds).
-
If you wish to memorise the channel, select Store programme option using
 button and proceed as indicated in previous page. Otherwise, continue
the search using  /  buttons.
If you have modified System, Skip, Fine tuning options or if you have launch
a Manual Search, select Store Prog. option using
 /  buttons and proceed
as indicated above to save your modification.
Press the MENU button to exit the PIP menu.
ViewSonic 19 N2060w