Display the Main menu by pressing MENU
button.
Select the Set up menu using the button.
Press the OK button to confirm
Use the / buttons to select each option.
OSD language : To select the language for the menus.
OSD timeout : To set an automatic shut-off time for Menu. Using / buttons
select 5 > 10 > 20 > 30 > 40 > 50 seconds.
OSD background : Select Opaque or Transparent type.
Sleep Timer : To set an automatic shut-off time. Using / buttons select Off
> 15 > 30 > 45 > 60 > 90 > 120 minutes.
Once the time is ended, TV set automatically switch on standby mode .
If you turn the TV on standby mode after setting the sleep timer, setting will
be erased. Set it again.
Blue Screen : To have a blue screen when there is no video input or when the
RF signal is very bad.
Using the / buttons select On.
Select Off if you do not want the blue screen.
Teletext language: Using / buttons, select the character set that wil be
used for Teletext on this channel.
The following character sets are available: West Europe, East Europe,
Cyrillic (Russia), Greek, Arabic, Persian,.
The character set determines how characters are displayed on Teletext
screen.
Press the MENU button to exit the SETUP menu.
Note : this menu is removed automatically after a few seconds without using
the remote control.
Note : You can display the remaining time before the automatic shut-off. To do
that, press the sleep button.
To cancel the automatic shut-off, press several times the sleep button to
display Sleep timer Off .
ViewSonic 21 N2060w
To Next Page
Loading...
