EasyManua.ls Logo

ViewSonic NMP660 - 5 Troubleshooting; The Power Is Switched On, but Chromebox Does Not Start; Cannot Access the LAN; Cannot Connect to the Bluetooth Device

ViewSonic NMP660
26 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
15
5. Troubleshooting
If you experience a problem with your Chromebox, refer to the following
troubleshooting guide. If a problem persists, contact the service center.
The power is switched on, but Chromebox does not start:
Make sure that the AC adapter is properly plugged into the DC-in jack of the
Chromebox and to the power outlet. Refer to page 12.
Cannot access the LAN:
Make sure you have connected one end of an RJ-45 cable to the LAN port of your
Chromebox and the other end to the network connection device or a network wall
connector. Refer to page 15.
Make sure you have configured the LAN settings correctly. Refer to page 23.
Cannot connect to the Bluetooth device:
Make sure the Bluetooth device you want to connect to is near- by your
Chromebox and is visible to other devices.
No audio is heard from the Chromebox:
Make sure audio is not muted. Refer to page 22.

Related product manuals