16
Troubleshooting
Symptom Remedy
The LED is off. Make sure the dongle is inserted properly.
Otherwise contact your vendor.
The LED is always on not
blinking.
Make sure that you have installed the driver from
attached CD. Otherwise contact your vendor.
The LED is blinking but the
icon does not appear in your
icon tray.
Make sure that you have installed the Utility from
the attached CD.
The dongle is linking, but can’t
share les with others.
Make sure the le and printer sharing function is
enabled. You can enable the function by checking
the icon of My Computer -> Control Panel ->
Network -> le and printer sharing -> I want to
be able to give others to access to my les.
Slow or poor performance
under AP mode.
Try to select another channel for the
communicating group or move your device closer
to the Access Point.
To Next Page
Loading...
