43
Adjusting 4 corners
You can manually adjusts the shape and size of an image that is unevenly rectangular
on all sides.
1. To display the Corner Adj. page, you can do one of the followings:
i. Press Enter.
ii. Open the OSD menu and go to the DISPLAY > Corner Adj. menu and press
Enter. The Corner Adj. page is displayed.
2.Press /// to select the corner you wish to adjust and press Enter.
3. Press / to select an adjustment method that suits your need and press Enter.
4.Press /// to adjust its shape and size (/ for a 45-degree angle
adjustment and / / / for a 90-degree angle adjustment).
During this process, you can press Menu or Exit to go back to a previous step. A long
press for 2 seconds on Enter will reset the settings.
• Adjusting keystone or aspect ratio will reset the Corner Adj. settings.
To Next Page
Loading...
