EasyManua.ls Logo

ViewSonic LS800WU - User Manual

ViewSonic LS800WU
101 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
LS800WU/LS800HD
DLP Projector
User Guide
Model No. VS17078/VS17079
IMPORTANT: Please read this User Guide to obtain important information on installing
and using your product in a safe manner, as well as registering your product for future
service. Warranty information contained in this User Guide will describe your limited
coverage from ViewSonic Corporation, which is also found on our web site at http://
ZZZYLHZVRQLFFRP LQ(QJOLVKRULQ VSHFL¿FODQJXDJHV XVLQJWKH 5HJLRQDOVHOHFWLRQ
box in the upper right corner of our website. “Antes de operar su equipo lea cu
idadosamente las instrucciones en este manual”

Questions and Answers

  • C
    clongAug 11, 2025
    How to fix a ViewSonic Dlp projector that does not turn on?
    • I
      ilarsonAug 11, 2025
      If your ViewSonic Dlp projector isn't turning on, first ensure the power cord is properly connected to both the projector's AC inlet and a functioning power outlet, and that the outlet switch is on. Also, if the projector was recently turned off, wait for the cooling process to complete before attempting to turn it on again.
  • K
    Kathleen LopezAug 18, 2025
    What to do if my ViewSonic LS800WU has no picture?
    • A
      Alexis DeckerAug 18, 2025
      If there is no picture on your ViewSonic Dlp projector, first ensure that the video source is turned on and correctly connected. Next, verify that the projector is correctly connected to the input signal device. Finally, select the correct input signal using the Source key on the projector or remote control.
  • L
    laurenmitchellAug 26, 2025
    Why is my ViewSonic LS800WU Dlp projector remote control not working?
    • B
      bnguyenAug 26, 2025
      If the remote control for your ViewSonic Dlp projector isn't working, try these steps: * Replace the battery with a new one. * Ensure there are no obstacles between the remote and the projector. * Make sure you are within 8 meters (26 feet) of the projector. * Adjust the remote control code to match the projector's settings.
  • J
    Julie ArcherSep 2, 2025
    How to fix a blurred image on a ViewSonic LS800WU Dlp projector?
    • S
      Sheryl SimsSep 2, 2025
      If the image on your ViewSonic Dlp projector is blurred, try these solutions: first, adjust the focus of the lens using the focus ring. Second, adjust the projection angle, direction, and height of the projector to properly align it with the screen.

Summary

Important Safety Instructions

Laser Warning

Class 3 R Laser Product

Warning about potential eye exposure hazards from the Class 3R laser.

Positioning Your Projector

Choosing a Location

Guidance on selecting optimal placement for the projector based on room layout.

Connection

Operation

Utilizing Password Function

Setting a Password

Procedure for enabling and setting a password for security and unauthorized use prevention.

Adjusting Projected Image

Troubleshooting

Common Issues and Solutions

A guide to diagnosing and resolving common problems encountered with the projector.

Projector Specifications

ViewSonic LS800WU Specifications

General IconGeneral
Resolution1920 x 1200
Light SourceLaser
Input Lag16 ms
3D ReadyYes
Vertical Lens ShiftYes
Brightness5, 000 lumens
ConnectivityHDMI, VGA, RS-232, RJ-45
Lamp Life20000 hours
Keystone Correction±30° (Vertical & Horizontal)
Projection Size30" to 300"
OutputsAudio Out

Related product manuals