52
RS232 by Telnet Function
Besides projector connected to RS232 interface with “Hyper-Terminal” communication by
dedicated RS232 command control, there is alternative RS232 command control way, so
called “RS232 by TELNET” for LAN/RJ45 interface.
Quick Start-Guide for “RS232 by TELNET”
1. Check and get the IP-Address on OSD of the projector.
2. Make sure that laptop/PC can access the web-page of the projector.
3. Make sure that “Windows Firewall” setting to be disabled in case of “TELNET”
function filtering out by laptop/PC.
4. Start > All Programs > Accessories > Command Prompt.
5. Input the command format like the below:
telnet ttt.xxx.yyy.zzz 23 (“Enter” key pressed)
To Next Page
Loading...
