EasyManua.ls Logo

ViewSonic LS800WU - RS232 Command Table

ViewSonic LS800WU
101 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
80
RS232 command table
<Pin assignment for this two end>
<Interface>
When select HDBaseT for RS232 control channel, change Baud rate to 9600.
Pin Description Pin Description
1NC2RX
3TX4NC
5GND6NC
7RTSZ8CTSZ
9NC
RS-232 protocol
Baud Rate 115200 bps (default)
Data Length 8 bit
Parity Check None
Stop Bit 1 bit
Flow Control None

Related product manuals