ViewSonic PX703HD - Appendix; Specifications

58
Appendix
Specifications
Item Category
Specifications
PX703HD PX703HDH
Projector
Type DLP Lamp
Display Size 60”~300” (W: 1.49~7.45, T:1.94~9.69)
Brightness (Lumens) 3,500 ANSI
Throw Ratio 1.127~1.46 (95”±3%@2.36m)
Lens 1.3x±2% Optical Zoom
Lamp Type OSRAM P-VIP 203/0.8 E30.5
Display System 1-CHIP DMD
Input Signal
VGA
f
h
: 15K~102kHz,
f
v
:48~120Hz,
Pixel rate: 170MHz
N/A
HDMI
f
h
: 15K~102kHz, f
v
:23~120Hz,
Pixel rate: 170MHz
Resolution
Native 1920 x 1080
Power Adapter
1
Input Voltage AC 100-240V, 50/60 Hz (auto switch)
Operating
conditions
Temperature 0°C to 40°C (32°F to 104°F)
Humidity 0% to 90% (non-condensing)
Altitude
0 to 1,499 m at 5°C to 35°C
1,500 to 3,000 m at 5°C to 25°C
Storage
conditions
Temperature -20°C to 60°C (non-condensing)
Humidity 0% to 90% (non-condensing)
Altitude 0 to 1,219 m at -20°C to 30°C
Dimensions
Physical
(W x H x D)
312 x 108 x 222 mm
(12.3” x 4.3” x 8.7”)
Weight
Physical 3.78 kg (8.33 lbs)
Power Saving
Modes
On
2
300W (Typical)
Off < 0.5W (Standby)
1
Please use the power adapter from ViewSonic® or an authorized source only.
2
The test condition follows EEI standards.