Other Information
1
Macintosh models prior to G3 require a Macintosh adapter. To order an Macintosh adapter,
contact Customer Support. You will need to provide the product serial number.
NOTE: This product was designed for operation in the magnetic fields of the hemisphere where it was
purchased.
Specifications
CRT
Type
Dot Pitch
Phosphor
Glass surface
17” (16.0” viewable diagonal area), 90
o
deflection, 29.1
mm Neck
0.23 mm horizontal, 0.13 mm vertical, and 0.27 mm
diagonal dot pitch
RGB medium short persistence
Input Signal
Video
Sync
RGB Analog (0.7/1.0Vp-p, 75 Ohms)
f
H
: 30-70 kHz, f
v
: 50-160 Hz
H / V Separate (TTL), Composite
Compatibility
PC
Macintosh
1
VGA up to 1280 x 1024
Power Macintosh (may require Macintosh cable
adapter)
Resolution
Recommended and
supported
1280 x 1024 @ 60 Hz
1024 x 768 @75, 85 Hz
800 x 600 @ 75, 85 Hz
640 x 480 @ 60, 75, 85 Hz
640 x 400 @ 70 Hz
MAC 640 x 480 @ 67 Hz
MAC 800 x 600 @ 75 Hz
MAC 1024 x 768 @ 75 Hz
Power
Voltage
50/60 (+/- 3)Hz
Display Area
Default
Full scan
310 mm (H) x 230 mm (V) (typical)
325 mm (H) x 243 mm (V) (depends on signal timing)
Operating
Conditions
Temperature
Humidity
Altitude
32° F to 104° F (0° C to +40° C)
5% to 95% (no condensation)
To 10,000 feet
Storage
Conditions
Temperature
Humidity
Altitude
-40° F to +140° F (-40° C to +60° C)
5% to 95% (no condensation)
To 40,000 feet
Dimensions
Physical
(monitor)
Weight
Net15.0 kg / 33.1 lb (monitor only)
Regulations
UL/cUL,FCC-B,DHHS, ICES-B, MPR II, NOM, TUV-S
Energy Star
GS, CE, Ergo
®
Power Saving
Modes
On
Off
< 75 W TYPICAL (Green LED)
<4 W (Orange LED)
100-240 VAC
410 mm (W) x 402 mm (H) x 425 mm (D)
16.1” (W) x 15.8” (H) x 16.7” (D)
TM~50%, anti-glare, anti-reflection
ViewSonic Q71 10
To Next Page
Loading...
Need help?
General