Airplane mode – Disables all wireless connections in accordance
with airplane regulations.
Wi-Fi – Turn your wireless connection On or Off.
Wi-Fi Settings – Manage your wireless network settings, add a
network, and detect a network.
Bluetooth – Turns Bluetooth on or off.
Bluetooth settings – Scan for devices, manage connections, and
set device name. Bluetooth settings are only enabled when
Bluetooth is turned on.
Wi-Fi Settings
Set up and manage wireless access points.
Advance settings – access additional settings including MAC
address information.
Scan for networks
Add a Wi-Fi network
Bluetooth Set Up
1. Turn the gTablet and your remote device Bluetooth “ON”. (1)
2. Tap on “Discoverable” so that your Bluetooth device can see the
gTablet. (2)
3. Under Bluetooth settings, “Scan for devices”. (3)
4. After Scanning, select the desired device by tapping on it and
start pairing. (4)
5. Type the password as indicated on both the gTablet and the
remote device and complete the connection
To Next Page
Loading...
