Why is the touch panel not functioning properly on my ViewSonic ViewPad 10pi Tablet?
If the touch panel on your ViewSonic Tablet isn't working right, it might be because the environmental conditions are different from the factory settings, so try recalibrating the touch screen. Also, make sure your finger is dry and clean, or that the stylus pen you're using is approved for capacitive touch panels.
What to do if my ViewSonic ViewPad 10pi Tablet system locks up?
If your ViewSonic Tablet system locks up, restart it by pushing the reset button. Also, make sure to perform Windows updates regularly to get the latest system and device improvements, and install the newest device drivers and application versions.
Why is my ViewSonic Tablet battery not charging?
If your ViewSonic Tablet battery isn't charging, make sure you're using the AC power adapter that came with the device, as using the wrong one with insufficient power or an incorrect plug can cause this issue. Also, this device does not support charging via USB.
Why is multi touch not working on my ViewSonic Tablet?
If multi-touch isn't working on your ViewSonic Tablet, it could be due to several reasons. If you're using Windows 7 Starter or Basic, know that it supports only single touch, so you should upgrade to Windows 7 Home Premium or higher. Also, make sure the application you're using supports multi-touch. Finally, ensure that you are performing the hand gestures correctly.
General| Display Size | 10.1 inches |
|---|---|
| Operating System | Android |
| Wi-Fi | 802.11 b/g/n |
| Card Reader | MicroSD |
| Expandable Storage | Up to 32GB |
| Ports | 3.5mm audio jack |
To Next Page
