ViewSonic ViewPad 10pi User Manual

11
Chapter 3: Cellular Data Network (3G Data) Setup
CAUTION!
The 3G does not support hot-plug detect. Please make sure the device is powered down
when inserting or removing the SIM. Inserting or removing SIM while the device’s power is
ON may cause system shutdown.
NOTE!
Your ViewPadpi may not have an SIM slot. The congurations may vary depending on the
model number. Check the actual model for specics.
To install SIM card, you need to turn off the tablet rst, then insert SIM card following
the indicative mark.
To remove SIM card, you also need to turn off the tablet rst, then push to reject the
SIM card from the slot.
Starting Wireless Manager
Your Mobile Broadband Module is supplied with the Wireless Manager software
application. Wireless Manager provides a set of tools that you can use to congure
and manage mobile broadband connections on your ViewPad. When you open
Wireless Manager, the Wireless Manager main window is displayed. The main
window provides important status information and allows you to connect and
disconnect.
At Windows desktop, tap on icon to open Wireless Manager. If Wireless Manager
is running but no Wireless Manager Window is open, double-click the status icon
in the Windows notication area, or right-click the icon and select Open Wireless
Manager.

ViewSonic ViewPad 10pi Specifications

General

Brand	ViewSonic
Model	ViewPad 10pi
Category	Tablet
Language	English