- 13 –
Conserve: Decreases the brightness by 50%.
NOTE: When the ECO Mode is set to “Optimize” or “Conserve”, the
Brightness, Contrast, and Dynamic Contrast cannot be adjusted.
Setup Menu displays the menu shown below:
Language Select allows the user to choose the language used in the menus
and control screens.
Resolution Notice advises the optimal resolution to use.
OSD Position allows the user to move the OSD menus and control screens.
OSD Timeout sets the length of time the OSD screen is displayed. For
example, with a “15 second” setting, if a control is not pushed within 15
seconds, the display screen disappears.
OSD Background allows the user to turn the OSD background On or Off.
Memory Recall returns the adjustments back to factory settings if the display
is operating in a factory Preset Timing Mode listed in the Specifications of this
manual.
Exception: This control does not affect changes made with the User Color
control, Language Select or Power Lock setting.
SHORT CUTS FUNCTION FROM THE BUTTONS
[1]
Main Menu
[2]
Auto Image Adjust
[▼]
To immediately activate Brightness and menu. It should
be change to Contrast OSD by push button[2]
[▲]
To immediately activate Contrast menu. It should be
change to Brightness OSD by push button[2]
To Next Page
Loading...
